Pioneer MEP-7000 Service Manual page 122

1
Updating is properly completed when the USB STOP LED
A
goes dark and the Completion screen is displayed on the
center display.
Turn the unit off then back on again with the POWER key.
The startup animation is displayed when the unit is
restarted.
B
C
Check that the versions are updated in Service mode.
For details on how to check, see "[2] Version Information"
"6.2 SERVICE MODE FOR THE DRIVE UNIT."
D
On the UTILITY screen, only the version of the
Memo:
main Assy can be checked.
E
F
122
1
2
of
MEP-7000
2
3
Completion screen
Turn power off and on once before using.
Startup animation
3
4
4