Main Unit Display - Pioneer CDJ-900NXS Operating Instructions Manual

Main unit display

Normal playback screen
7
6
5
4
3
2
1
1 CUE
The positions of currently set cue and loop points are displayed as
marks.
2 MEMORY
Cue and loop points recorded on USB devices are displayed as
marks.
3 A. CUE
This lights when auto cue is set.
= Setting auto cue (p.23)
4 PLAYER
This indicates the player number (1 – 4) assigned to this unit.
5 TRACK
This indicates the track number (01 – 99).
6 REMAIN
This lights when the time display is set to the remaining time.
7 Information display section
The enlarged waveform analyzed with rekordbox, etc., is displayed
here.
8 Track name
9 PHASE METER
This indicates the amount of divergence of the bars and beats with
the master player when using the beat sync function.
a BEAT COUNTDOWN
This indicates the number of bars or beats from the currently playing
position to the nearest stored cue point.
b KEY
This indicates the track's key.
c ZOOM and GRID ADJUST mode display
When the rotary selector is pressed for over 1 second, the mode
switches between the [ZOOM] mode and the [GRID ADJUST] mode.
! [ZOOM] mode: The waveform zooms in or out when the rotary
selector is turned.
! [GRID ADJUST] mode: When the rotary selector is turned, the
beat grid is adjusted.
The beat grid can be adjusted using the [MENU (UTILITY) ]
button.
— [reset]: Resets the adjusted beat grid.
— [snap grid (CUE)]: Moves the first beat to the position of the
currently set cue.
8
m
9 a
l k
— [SHIFT GRID]: Reflects the results adjusted during synchroni-
zation (pitch bend, etc.) on the beat grid.
d QUANTIZE
This is displayed when [QUANTIZE] is on.
e Time display (minutes, seconds and frames)
There are 75 frames to a second.
f MT
This lights when the master tempo is set.
= Adjusting the playing speed without changing the pitch (Master
Tempo) (p.21)
g BPM
Displays BPM (Beats Per Minute) of the track currently being played.
! The BPM measured by this unit may differ from the BPM indi-
cated on the disc or that of a Pioneer DJ mixer, etc. This is due to
the different methods used for measuring the BPM, and is not a
malfunction.
h Playing speed display
The value changes according to the position of the [TEMPO] slider.
i Playing speed adjustment range display
This indicates the range in which the playing speed can be adjusted
with respect to the original playing speed recorded on the medium.
j CALL/LOOP beat display
!
is displayed anytime other than when in the loop or slip
beat loop modes.
When it is displayed, cue or loop points can be called out using
the [CUE/LOOP CALL c(LOOP 1/2X), d(LOOP 2X)] button.
!
is displayed when in the loop mode. The number set
with the [CUE/LOOP CALL c(LOOP 1/2X), d(LOOP 2X)] button
is displayed in the frame.
When it is displayed, the loop can be cut or doubled using the
[CUE/LOOP CALL c(LOOP 1/2X), d(LOOP 2X)] button.
! is displayed when in the slip beat loop mode. The num-
ber set with the [CUE/LOOP CALL c(LOOP 1/2X), d(LOOP 2X)]
button is displayed in the frame.
When it is displayed, the loop can be cut or doubled using the
[CUE/LOOP CALL c(LOOP 1/2X), d(LOOP 2X)] button.
k WAVE display
This displays the WAVE display, guidance, etc.
b
c
d
e
f
g
h
i
j
17
En