Group Connect Call Information; Teamdc - Kyocera DURAXTP User Manual

Join or Rejoin a Group Connect Call
If you are not available at the beginning of a Group Connect call, or if you drop off the call
temporarily, you can rejoin the in-progress Group Connect call.
1. Press
> History.
2. Highlight the call and press the DC button.
3. Continue the Group Connect call as described previously.
Tip: You can also join or rejoin a Group Connect call from your Contacts list if you have stored the
group. See Add a Group Contact. Select the group entry and press the DC button.
Note: If the Group Connect call has already ended, pressing the DC button initiates a new Group
Connect call.
Note: If you do not want to participate in a Group Connect call, press
softkey).
Set Group Termination Options
1. Press
> Settings > DC Settings > Group Call Options.
2. Highlight an option and press
Allow the call to continue: keeps the call active even after you hang up. The call will
l
remain active until the last members disconnect.
End the call for everyone: terminates the call session for all connected members.
l

Group Connect Call Information

Your phone's display may show some useful information during a Group Connect call.
During a Group Connect call, the following information may appear on your screen:
The name of the group.
n
The name or Direct Connect number of the person speaking.
n
The number of group members who are connected to the call out of the number invited (for
n
example, 4 out of 6).

TeamDC

TeamDC lets Direct Connect users make group calls to up to 500 other users nationwide. With
TeamDC, any Direct Connect or Sprint user can create a TeamDC group online, which the system
then automatically pushes to all the group members' phones. Once a user creates and distributes a
Sprint Direct Connect
.
or IGNORE (right
51