Remove Yourself From A Teamdc Group; Teamdc Call Information - Kyocera DURAXTP User Manual

– or –
Press > History.
2. Highlight a TeamDC group and press the DC button.
3. Continue the TeamDC call as any other Direct Connect or Group Connect call.
4. When you are finished, press
you initiated, all other participants are dropped from the call. To change this option, see Set
Group Termination Options.)
Note: Group Termination Options: By default, when the originator of a Group Connect or
TeamDC call ends the call, the system disconnects all other participants as well. When available,
you will be able to select a setting in Settings > DC Settings > Group Call Options to allow
Group Connect and TeamDC calls you initiate to remain active after you leave the call.
Join or Rejoin a TeamDC Call
If you are not available at the beginning of a call, or if you drop off the call temporarily, you can rejoin
the in-progress TeamDC call.
1. Press
> History.
2. Highlight the TeamDC entry and press the DC button.
3. Continue the TeamDC call as described previously.
Tip: You may also join or rejoin a TeamDC call from your Contacts. Select the TeamDC group and
press the DC button.
Note: If the TeamDC call has already ended, pressing the DC button initiates a new TeamDC call.

Remove Yourself From a TeamDC Group

You may have the option to remove yourself from a TeamDC group.
1. From standby mode, press CONTACTS (right softkey).
2. Highlight a TeamDC group and press OPTIONS (right softkey) > Remove Me.
3. Press REMOVE (left softkey).
Note: This action also deletes the TeamDC group you belonged to from your Contacts.
Note: TeamDC group membership can either be forced or non-forced. With a forced TeamDC
group, an end user on the same account cannot be removed from the group, whereas a user not on
the same account can.

TeamDC Call Information

Your phone's display may show some useful information during a TeamDC call.
Sprint Direct Connect
to end the call. (By default, when you end a TeamDC call that
53