Group Connect Call Information; Invites; Send An Invite - Kyocera DuraMax E4210 User Manual

Note: If the Group Connect call has already ended, pressing the DC button initiates a new
Group Connect call.
Note: If you do not want to participate in a Group Connect call, press
Set Group Termination Options
1. Press > Settings > DC Settings > Group Call Options.
2. Highlight an option and press.
ƒ
End the call for everyone: terminates the call session for all connected members.
ƒ
Allow the call to continue: keeps the call active even after you hang up. The call
will remain active until the last members disconnect.

Group Connect Call Information

During a Group Connect call, the following information may appear on your screen:
The name of the group.
The name or Direct Connect number of the person speaking.
The number of group members who are connected to the call out of the number invited
(for example, 4 out of 6).

Invites

You can send an Invite to initiate a Group Connect call. When the group members receive an
Invite, their phones sound a tone and display your name (if it is in Contacts).
While on a call, you may also send an invitation message to a specific Contacts entry, or to the
group members who have not joined the call yet.

Send an Invite

Reply to an Invite
Send an Invite
Send an Invite to start a call
1. Select a group from History or Contacts.
2. Press MSG/INVITE (left softkey) > DC Invite. (You will see a prompt.)
3. Press and release the DC button.
Sprint Direct Connect 45
.