Call Setup - Kyocera DURAXTP User Manual

Audible Tone to beep when a notification is on the notification bar.
l
Vibrate to vibrate when a notification is on the notification bar.
l
Blink LED to blink the LED indicator when a notification is on the notification bar.
l
3. Select On or Off.
To set the repeat interval for notifications:
1. Press
> Settings > Others > Alerts > Persistent Alerts > Repeat Interval.
2. Select your desired repeat interval.
Call Setup
You can configure various call-related settings. See Call Settings.
Time & Date Settings
Use the Time & Date settings menu either to automatically use the network-provided date and time
or manually set these values.
Note: Your phone's Time & Data settings menu is set to Automatic by default.
Set Time & Date Manually
You can set the time and date manually when your phone is connected to the GSM network and
cannot use the network-provided date and time.
Note: You can't set the time and date manually when you are connected to the CDMA network.
1. Press
> Settings > Others > Time & Date > Manual.
2. Select Time & date. Adjust the hour and minute using number keys, and select AM or PM using
the navigation key up or down. Then adjust the date, month, and year using number keys. Press
OK (left softkey) when finished.
3. Select Time Zone, and then select a time zone from the onscreen list. Scroll down the list to
view additional time zones.
4. Select DST to select On or Off.
5. Press SAVE (left softkey) to save the settings.
Data Settings
You can turn on or off your phone's data services.
Enable Data Services
When your phone's data services are turned off, you may enable them at any time.
Settings 127