Call A Phone Number In A Message; Set Up Speed Dialing - Kyocera DURAXTP User Manual

Note: When dialing a number with a hard pause, press SEND TONES (left softkey) to send the next
set of numbers.

Call a Phone Number in a Message

You can place a call to a number that appears in a message.
1. From standby mode, press MESSAGING (left softkey) > Messages.
2. Select a message with the number you want to call and highlight the number.
3. Press
.
For more information on utilizing the information in a message, see Simple Data Exchange.

Set Up Speed Dialing

Your phone can store up to 98 phone numbers in speed dial locations. To make a call using speed
dial, see Call Using a Speed Dial Number.
1. Add a number to a new or to an existing Contacts entry. See Add a Number to a Contact, if the
number is not in your Contacts.
– or –
From standby mode, press CONTACTS (right softkey), highlight an entry and press
2. Highlight the number and press OPTIONS (right softkey) > Set Speed Dial.
3. Highlight an available speed dial location and press
4. Press
to return to the Contacts menu.
To replace a number in a speed dial location:
1. From standby mode, press CONTACTS (right softkey).
2. Press OPTIONS (right softkey) > Settings > Speed Numbers.
3. Highlight the assigned contact you want to replace and press OPTIONS (right softkey) >
Replace.
4. Highlight a contact and press
If the contact has more than one number, press the navigation key right or left to display the
l
number you want to assign and then press
To remove a number from a speed dial location:
Phone Calls
> REPLACE (left softkey).
> REPLACE (left softkey).
.
.
32