Opt-In Teamdc; Choose Active Groups; Invites; Send An Invite - Kyocera DURAXTP User Manual

During a TeamDC call, the following information may appear on your screen:
The name of the group.
n
The name or Direct Connect number of the person speaking.
n
The number of TeamDC members who are connected to the call out of the number invited (for
n
example, 4 out of 6).

Opt-In TeamDC

Opt-In TeamDC works like a chatroom. You can make and manage Opt-In TeamDC groups in the
same way as you would for TeamDC groups on the Web. You can also send an Invite during an Opt-
In TeamDC call to the group members who have not yet joined the call. (See Send an Invite during a
call.)

Choose Active Groups

At any given time, you can specify which TeamDC and Opt-in Team DC groups you wish to be
active on your phone. You can either participate in all TeamDC and Opt-in TeamDC calls for which
you are a member, or select specific groups to be active.
1. From standby mode, press Contacts (right softkey) > Options (right softkey) > Choose
Groups.
2. Select an option:
All TeamDC Groups to allow TeamDC calls and Opt-In TeamDC calls and Invites for all
l
groups.
Select Active Groups to allow TeamDC calls and Opt-In TeamDC calls and Invites for
l
certain groups only. Select the groups and press CONTINUE (left softkey).

Invites

You can send an Invite to initiate a Group Connect call. When the group members receive an Invite,
their phones sound a tone and display your name (if it is in Contacts).
While on a call, you may also send an invitation message to a specific Contacts entry, or to the group
members who have not joined the call yet.

Send an Invite

You can send an Invite to initiate a call. You can also send an Invite during a call to those who have
not joined the call yet.
Send an Invite to start a call
1. Select a group from History or Contacts.
2. Press MSG/INVITE (left softkey) > DC Invite. (You will see a prompt.)
Sprint Direct Connect 54