Remove The Battery; Charge The Battery; Turn Your Phone On And Off - Kyocera DURAXTP User Manual

5. Using a coin, rotate the battery cover screw in clockwise direction until the cover locks.
CAUTION! M ake sure you lock the battery cover properly to maintain the phone's waterproof
capability.

Remove the Battery

Follow these instructions to remove your phone's battery. Always power the phone off before
removing the battery.
1. Make sure the power is off so that you don't lose any stored numbers or messages.
2. Insert a coin into the slot on the back cover and turn it counter-clockwise to open the back cover.
3. Remove the battery and replace the cover. See Insert the Battery.
CAUTION! D o not handle a damaged or leaking Li-Ion battery as you can be burned.

Charge the Battery

Follow these instructions to charge your phone's battery.
1. Open the cover to the USB/charging port on the left side of the phone.
2. Plug the smaller end of the micro-USB cable into the phone's USB/charging port.
3. Plug the other end of the USB cable into the charger, and then plug the charger into an electrical
outlet.
4. When charging is complete, remove the cable from the port and close the cover. Press around
the edges of the cover to ensure that it is securely closed.
CAUTION! Be sure all ports and covers are properly sealed to maintain the phone's waterproof
capability
Note: Before turning on your phone, charge the battery fully with the charger that came with your
phone.

Turn Your Phone On and Off

The instructions below explain how to turn your phone on and off.
Get Started 10