Group Connect Call Information; Teamdc - Kyocera Sprint DuraCore User Manual

3. Continue the Group Connect call as described previously.
Tip: You can also join or rejoin a Group Connect call from your Contacts list if you have
stored the group. See
button.
Note: If the Group Connect call has already ended, pressing the DC button initiates a new
Group Connect call.
Note: If you do not want to participate in a Group Connect call, press
softkey).
Set Group Termination Options
1. Press > Settings > DC Settings > Group Call Options.
2. Highlight an option and press

End the call for everyone: terminates the call session for all connected members.

Allow the call to continue: keeps the call active even after you hang up. The call
will remain active until the last members disconnect.

Group Connect Call Information

During a Group Connect call, the following information may appear on your screen:
● The name of the group.
● The name or Direct Connect number of the person speaking.
● The number of group members who are connected to the call out of the number invited
(for example, 4 out of 6).

TeamDC

TeamDC lets Direct Connect users make group calls to up to 199 other users nationwide. With
TeamDC, any Direct Connect or Sprint user can create a TeamDC group online, which the
system then automatically pushes to all the group members' phones. Once a user creates and
distributes a TeamDC group, any member of the group can make a TeamDC call to the entire
group. If the user who created the group makes any changes to the group, the system
automatically sends updates to the members' phones.
Note: The TeamDC feature supports group calls only with Direct Connect users with Sprint
phones. You cannot include users with Nextel phones in TeamDC groups.
Set Up a TeamDC Group
Update TeamDC Groups
Make a TeamDC Call
Sprint Direct Connect
Create a Group Entry. Select the group entry and press the DC
.
44
or IGNORE (right