Change The Backlight Settings; Set The Notification Pop-Up; Select A Picture Id - Kyocera DURAXTP User Manual

Press to display the main menu, and then press OPTIONS (right softkey) > Large Font or
Normal Font.

Change the Backlight Settings

Select how long the display screen remains backlit after any keypress is made. You can also change
the backlight settings for a Java application that is running in the foreground.
To change the screen backlight setting:
1. Press
> Settings > Display > Backlight.
2. Select Backlight Dim or Backlight Off.
If you select Backlight Dim, select Always Bright, Always Dim, or a preset length of time
l
to elapse before the screen backlight dims.
If you select Backlight Off, select a preset length of time to elapse before the screen,
l
keypad and keyboard backlights turn off. (When you select Always Bright for the
Backlight Dim setting in step 2, the keypad and keyboard backlight will turn off after about
one minute.)
Note: Long backlight settings reduce the battery's talk and standby times.
To change the Java application backlight setting:
Press > Settings > Display > Backlight > Java Backlight > Default or Continuous.
n

Set the Notification Pop-up

This option allows you to enable or disable notification pop-up when you receive a new notification
(except for incoming call and alarm) while an application is running.
1. Press > Settings > Display > Notification.
2. Select Enable Pop-up or Disable Pop-up.
Tip: If you select Disable Pop-up, you will see only a notification icon. (The notification pop-up will
not appear while an application is running.)

Select a Picture ID

You can select an image as a picture ID.
1. Press
> Settings > Display > Picture ID.
2. Select Contact, Unsaved Numbers, or Private / Unknown.
If you select Contact, select an entry.
l
Settings 116