Call A Phone Number In A Message; Call Emergency Numbers - Kyocera Kona User Manual

2-Sec. Pause automatically sends the next set of numbers after two seconds.
n
Note: You can have multiple pauses in a phone number and combine two-second and hard pauses.
To dial or save phone numbers with pauses:
1. Enter all or part of a number.
2. Press OPTIONS (right softkey) > H ard Pause or 2-Sec. Pause.
3. Enter additional numbers.
4. Press
to dial the number.
– or –
Press OPTIONS (right softkey) > S ave. (You can save to a new or existing Contacts entry.)
Note: When dialing a number with a hard pause, press SEND TONES (left softkey) to send the
next set of numbers.

Call a Phone Number in a Message

You can place a call to a number that appears in a message. For more information on utilizing the
information in a message, see Simple Data Exchange.
1. From standby mode, press MESSAGING (left softkey) > M essages.
2. Select a message with the number you want to call and press

Call Emergency Numbers

You can place calls to 9-1-1 even if your phone is locked or your account is restricted.
Press and hold
n
– or –
Press
Note: After you have placed an emergency call, your phone automatically enters the Emergency
Mode.
View Option During an Emergency Call
During an emergency call, press OPTIONS (right softkey) to view the following:
n
Transfer Audio to switch the call to an external device (if applicable).
l
Phone Calls
> O K (left softkey).
.
.
15