Call A Phone Number In A Message; Call Emergency Numbers - Kyocera DuraPro User Manual

1. Enter all or part of a number.
2. Press OPTIONS (right softkey) > Hard Pause or 2-Sec. Pause.
3. Enter additional numbers.
4. Press to dial the number.
– or –
Press OPTIONS (right softkey) > Save. (You can save to a new or existing Contacts
entry.)
Note: When dialing a number with a hard pause, press SEND TONES (left softkey) to send the
next set of numbers.

Call a Phone Number in a Message

You can place a call to a number that appears in a message.
1. In standby mode, press MESSAGING (left softkey) > Messages.
2. Select a message with the number you want to call.
3. Select the number and select Call.
For more information on utilizing the information in a message, see

Call Emergency Numbers

You can place calls to 911 even if your phone is locked or your account is restricted.
► Press
Note: After you have placed an emergency call, your phone automatically enters Emergency
mode.
During an emergency call, press OPTIONS (right softkey) to display your options. Highlight an
option and press
● Transfer Audio to switch the call to an external device (if applicable).
● Contacts to show the Contacts list.
● Voice Memo to record the other party's voice.
● Phone Info to display information about your phone.
Tip: Press MY PHONE# (left softkey) to display your phone number during an emergency
call.
Phone Calls & Settings
.
.
23
Simple Data Exchange.