Change The Backlight Settings; Set The Notification Pop-Up; Select A Picture Id - Kyocera Duraxa User Manual

► In standby mode, press
(right softkey) > Large Font or Normal Font.

Change the Backlight Settings

Select how long the display screen remains backlit after any keypress is made.
To change the main screen backlight setting:
1. Press > Settings > Display > Backlight.
2. Select Backlight Dim or Backlight Off.
If you select Backlight Dim, select Always Bright, Always Dim, or a preset

length of time to elapse before the screen backlight dims.
If you select Backlight Off, select a preset length of time to elapse before the

screen and keypad backlights turn off. (When you select Always Bright for the
Backlight Dim setting in step 2, the keypad backlight will turn off after about
one minute.)
Note: Long backlight settings reduce the battery's talk and standby times.

Set the Notification Pop-up

This option allows you to enable or disable notification pop-up when you receive a new
notification (except for incoming call and alarm) while an application is running.
1. Press > Settings > Display > Notification.
2. Select Enable Pop-up or Disable Pop-up.
Tip: If you select Disable Pop-up, you will see only a notification icon. (The notification
pop-up will not appear while an application is running.)

Select a Picture ID

You can select an image as a picture ID.
1. Press > Settings > Display > Picture ID.
2. Select Contact, Unsaved Numbers, or Private / Unknown.
If you select Contact, select an entry.

3. Select a picture ID option and press
Settings
to display the main menu, and then press OPTIONS
.
92