Settings; Display Settings; Change The Screen Saver (Wallpaper); Change The Brightness - Kyocera DuraPro User Manual

Settings

Display Settings

Change the Screen Saver (Wallpaper)

You can set a screen saver to display while in standby mode.
1. Press > Settings > Display > Screensaver.
2. Select a screen saver option by pressing the navigation key up or down, and select a
screen saver.

Change the Brightness

You can adjust the brightness on the main screen.
1. Press > Settings > Display > Brightness.
2. Highlight a brightness level and press

Change the Backlight Settings

Select how long the display screen remains backlit after any keypress is made.
To change the main screen backlight setting:
1. Press > Settings > Display > Backlight.
2. Select Backlight Dim or Backlight Off.
 If you select Backlight Dim, select Always Bright, Always Dim, or a preset length
of time to elapse before the screen backlight dims.
 If you select Backlight Off, select a preset length of time to elapse before the
screen and keypad backlights turn off. (When you select Always Bright for the
Backlight Dim setting in step 2, the keypad backlight will turn off after about one
minute.)
Note: Long backlight settings reduce the battery's talk and standby times.

Set the Notification Pop-up

This option allows you to enable or disable notification pop-up when you receive a new
notification (except for incoming call and alarm) while an application is running.
1. Press > Settings > Display > Notification.
2. Select Enable Pop-up or Disable Pop-up.
Settings
twice.
86