Before You Begin; Individual Parts; Regarding Genuine And Functional Parts; Remote Controller - dji MATRICE 600 Disclaimer And Safety Manuallines

Before You Begin

The following documents have been produced to help you safely operate and make full use of your
Matrice 600:
Matrice 600 In the Box
Matrice 600 Disclaimer and Safety Guidelines
Matrice 600 Quick Start Guide
Matrice 600 Intelligent Flight Battery Safety Guidelines
Matrice 600 User Manual
Check to see that you have all of the components listed in the Matrice 600 In the Box document. Before
assembly, read the Matrice 600 Disclaimer and Safety Guidelines . Get prepared using the Matrice 600
Quick Start Guide . Complete the assembly with the help of the Matrice 600 User Manual and the video
tutorial on the DJI website (http://www.dji.com). For more information, please refer to the Matrice 600
User Manual available on the DJI website. Make sure you fully understand the functionality of each
individual part, the flight condition requirements, the key contingency warning functions/systems, and all
government regulations before each flight. If you have any questions or problems during the assembly,
maintenance or use of this product, please contact DJI or a DJI authorized dealer.

Individual Parts

Regarding Genuine and Functional Parts

To avoid component malfunction, serious injury, and property damage, observe the following rules:
1. Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI
certified manufacturers may cause system malfunctions and compromise safety.
2. Ensure there are no foreign objects (such as water, oil, soil, sand, etc.) inside of the aircraft or its
components.
3. Ensure the aircraft and its components-including but not limited to the remote controller, flight
controller, Lightbridge
batteries-are all in good working order, damage-free, and functioning well. Refer to the remaining
sections in this document for more details on how to ensure the functionality of these components.
4. DO NOT remove parts that come with the aircraft-including but not limited to the flight controller,
power management unit, and Lightbridge 2 Air System-for other uses. DO NOT replace any of them
with other parts.

Remote Controller

1. Ensure the remote controller is fully charged before each flight.
2. If the remote controller is powered on and has NOT been used for 5 minutes, it will sound an alert. After 10
minutes it will automatically power off. Move the sticks or perform some other action to cancel the alert.
3. Adjust the clamp of the mobile device holder to allow a firm grip on your mobile device.
4. Ensure the mobile device holder is firmly in place and does not slip.
5. Ensure the antennas of the remote controller are unfolded and adjusted to the proper position to achieve
optimal transmission quality.
6. Repair or replace the remote controller if damaged. A damaged remote controller antenna will greatly
decrease performance.
8
©
2016 DJI. All Rights Reserved.
TM 2 Air System, landing gear, GPS, compass, propulsion system, and