Propulsion Systems - dji MATRICE 600 Disclaimer And Safety Manuallines

Hide thumbs Also See for MATRICE 600:

Table of Contents

GPS

1. Avoid catching your fingers in the collapsible mount of the GPS-Compass Pro.

2. Separate the GPS-Compass Pro from the body of the aircraft using the extension rod.

3. Fly in open areas. Tall buildings or steel structures may block the GPS signal and affect the accuracy of

the on-board compass.

Compass

1. Ensure that the compass is calibrated before your first flight.

2. DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as

magnetite, parking structures, and steel reinforcements underground.

3. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.

4. The DJI GO app will prompt you to resolve the compass issue if the compass is affected by strong

interference after calibration is complete. Follow the prompted instructions to resolve the compass issue.

Propulsion System

To avoid serious injury to yourself or others, which may be caused by the rotating propellers and

motors, observe the following rules:

Propellers

1. DO NOT use aged, chipped, or broken propellers.

2. Always power off the aircraft before touching the propellers.

3. Be aware of the sharp edges of the propellers when mounting or removing the propellers. Wear

gloves or take other protective measures when touching the propellers.

4. Ensure that the propellers are securely mounted to prevent them from falling off the motors.

5. Ensure that the propellers are unfolded before each flight.

6. DO NOT turn on the motors when propellers are mounted and there are other people or animals in

the immediate vicinity.

Motors

1. Ensure that the motors are securely mounted and rotating smoothly.

2. DO NOT attempt to modify the structure of the motors.

3. DO NOT touch or let your hands or body come in contact with the motors after flight as they may

be hot.

To avoid possible serious injury and property damage, observe the following rule:

1. DO NOT block any of the ventilation holes on the motors.

Table of Contents

M600