Numatic TTB 4055/100 Owner's Instructions Manual page 22

12
13
Off-Aisle Cleaning Kit (Optional Extra Accessory)
Fitting the Brush / Pad.
Push in the deck locking pin
(Fig.10) and rotate the
brush deck into the
operating position (Fig.11).
Turn on the clean-water tap (Fig.12).
To start: hold either trigger and press the yellow on / off switch once
(Fig.13).
Brush, vacuum and water settings can be controlled by the control panel
(See Page 32).
Fill the clean-water tank to a Max of 40 litres (see page 28)
For operation and cleaning controls (see page 32)
10
22
11
Off
On