MOTO GUZZI 1200 SPORT 4V Service Station Manual page 84

Engine from vehicle
•
Unscrew and remove the upper nut fix-
ing the engine and collect the washer.
•
Remove the upper pin and collect the
washer.
•
Lower the engine completely.
•
Lift the rear part of the vehicle.
•
Release the front belts.
•
Hold the rear part of the vehicle, remove the chassis from the engine.
Installing the engine to the vehicle
•
Place the vehicle chassis over the engine with the gear.
•
From the back, secure the chassis with belts and a hoist.
•
From the front, secure the vehicle with belts attached to the handlebar and fixed to the work
bench.
•
Lift the engine placing it in position.
AT LEAST UNTIL THE LOWER ENGINE BOLT IS TIGHTENED, PERFORM THE OPERATIONS
DESCRIBED AIDED BY A SECOND OPERATOR.
•
Working from the left side, fit the en-
gine upper bolt with the washer.
•
From the opposite side, fit the washer
and screw the nut.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG VE - 84
1200 SPORT 4V