MOTO GUZZI 1200 SPORT 4V Service Station Manual page 21

1200 SPORT 4V
020676Y Comparator support for piston posi-
tion checking
•
Reset the micrometer on the cylinder rim.
•
Move the tool so that the micrometer feeler reaches the top point of the piston crown.
•
Take note of the measurement and, according to the values found, consult the chart at the
bottom of the page to decide the thickness of the gasket to be fitted between cylinder and
head.
•
Unlock crankshaft rotation.
•
Rotate the crankshaft by 90°until the right cylinder piston reaches the TDC.
•
Lock crankshaft rotation.
•
Place the tool on the right cylinder stud bolts to determine the "squish" (X).
Specific tooling
020676Y Comparator support for piston position checking
•
Repeat the same operations to determine the thickness of the left cylinder gasket between
cylinder and head also for the right cylinder.
Specification
Value (X) -0.56 / -0.37 mm (-0.022 / -0.0146 in)
Value (X) -0.37 / -0.19 mm (-0.0146 / -0.0075 in)
Value (X) -0.19 / 0 mm (-0.0075 / 0 in)
Recommended products chart
Product
AGIP RACING 4T 10W-60
AGIP GEAR SAE 80 W 90
AGIP GEAR MG/S SAE 85 W 90
AGIP FORK 7.5W
AGIP GREASE SM2
Neutral grease or petroleum jelly.
AGIP BRAKE 4 / BRAKE 5.1
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
CYLINDER GASKET THICKNESS - HEAD
R
ECOMMENDED PRODUCTS
Description
Engine oil
Transmission oil
Gearbox oil
Fork oil
Lithium grease with molybdenum for
bearings and other points needing lubri-
cation
BATTERY POLES
Brake fluid
Desc./Quantity
gasket thickness: 0.65 mm (0.0256 in)
gasket thickness: 0.85 mm (0.0335 in)
gasket thickness: 1.05 mm (0.0413 in)
Specifications
SAE 10W - 60. As an alternative to rec-
ommended fluids, use top branded oils
with performances that meet or exceed
the requirements of CCMC G-4 API. SG
specifications.
SAE 5W / SAE 20W
NLGI 2
As an alternative for recommended flu-
ids, use top branded fluids that meet or
Characteristics
-
-
CHAR - 21