1200 SPORT 4V
•
Once the centring tool is fitted, lock the
plate with the snap ring.
•
Undo and remove the two screws fixing
the tool.
•
Remove the special tool.
•
Place the friction disc; centre it.
•
Place the clutch bell with the reference
facing upwards.
•
Place the start-up crown gear with the
reference facing upwards.
•
Tighten the six screws to the prescri-
bed torque operating diagonally and in
stages.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 123