MOTO GUZZI 1200 SPORT 4V Service Station Manual page 237

1200 SPORT 4V
tainer. This will release the tension on
the brake lever and will make it reach
the end of stroke.
•
Close the bleed valve before the lever
reaches its end of stroke.
•
Repeat the operation until the fluid
draining into the container is air-bubble
free.
NOTE
WHILE PURGING THE HYDRAULIC SYSTEM, FILL THE
RESERVOIR WITH THE NECESSARY QUANTITY OF
BRAKE FLUID CHECK THAT, DURING THE OPERATION,
THERE IS ALWAYS BRAKE FLUID IN THE RESERVOIR.
•
Screw the bleed valve and remove the pipe.
•
Top-up the reservoir until the right brake fluid level is obtained.
•
Refit and lock the rear brake fluid reservoir cap.
•
Refit the protective rubber cap.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Braking system
BRAK SYS - 237