1200 SPORT 4V
Crankcase - crankshaft
Removing the crankshaft
•
Remove the clutch.
•
Remove the tone wheel and the oil
pump gear.
•
Working from the generator side, un-
screw and remove the nut.
•
Remove both gears.
•
Remove the connecting rods.
•
Undo and remove the eight fixing
screws and collect the washers.
•
Hold the crankshaft during flange re-
moval.
•
Using the suitable special tool, remove
the crankshaft flange.
•
Remove the sealing ring from the
flange, if necessary.
Specific tooling
12.91.36.00 Tool to remove the flywheel-side
flange
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 153