Installing in a Chassis
The Converter can be fit into any of the expansion slots on a special
designed chassis.
Unscrew and pull out the
media converter board
First, install the converter onto a carrier supplied with the chassis:
Step 1-
Unscrew the carrier from the desired expansion slot on the
chassis.
Step 2-
Remove the screw on the converter as shown below.
Step 3-
Fit the converter onto the carrier and use the screw to secure
it.
1 2
Switch 1 : On -> Forced Mode
Off -> Auto Negotiation mode
Switch 2 : On -> LLR enable
Off -> LLR disable
3
Need help?
Do you have a question about the DMC-805G and is the answer not in the manual?