Installing In A Chassis - D-Link DMC-805G Quick Installation Manual

enabled and "Off" for disabled.
Note: When using two converters, don't enable the both devices' LLR
function at the same time.
I C
NSTALLING IN A HASSIS
The Converter can be fit into any of the expansion slots on DMC-1000
chassis.
Unscrew and pull out the media converter board
First, install the converter onto a carrier supplied with the chassis:
Step 1. Unscrew the carrier from the desired expansion slot on the
chassis.
Step 2. Remove the screw on the converter as shown below.
Step 3. Fit the converter onto the carrier and use the screw to secure
it.
4