Random Playback; Cassette Operation - Hyundai RTCC 411 RIP Instruction Manual

5. Press PLAY/PAUSE button to begin programmed playback. The PROGRAM indicator stops
flashing and remains ' On'. Playback will begin with the first track you programmed and will
continue until the last programmed track has played. Press SKIP FWD. or SKIP REV. button
to select a specific track in the programmed tracks.
6. After the last track has played, the player stops and the display shows the total number of
tracks on the disc and Cd 5 seconds in turn. However, the program sequence has been can-
celed in the memory. The program indicator goes 'Off'.
7. To turn the system off, press POWER button.

RANDOM PLAYBACK

In CD/MP3 playback, press RANDOM button once enter into random function. RANDOM in-
dicator remains 'On'. Press SKIP FWD. or SKIP REV. button to choose the tracks in the disc
randomly. Press RANDOM button again or press STOP button to cancel RANDOM function, the
RANDOM indicator goes 'Off'.

CASSETTE OPERATION

Note: Before inserting a tape in the player be sure that there is no excess slack in the cassette
that could become jammed in the mechanism. Refer to the Care and Maintenance section for
instructions on removing excess slack from the cassette.
1. Press POWER to turn on the appliance.
2. Set the function selector(AM/FM/PH/CD/TA) to TA position.
3. Insert your cassette into the slot located on right side cabinet, as shown in the illustration,
with the side you wish to play facing 'up' and the open end on the right side.
4. Cassette playback begins as soon as the tape is inserted. Adjust the VOLUME
control to the desired level.
5. To advance the tape rapidly, depress the EJ/FF (Eject/Fast Forward) button ap-
proximately half way. The tape will move forward rapidly as long as the button is
depressed. Normal playback will resume when the button is released.
6. When the tape ends the player stops automatically. Depress the EJ/FF (Eject/
Fast Forward) button completely to remove the cassette from the player. You may
press the EJ/FF (Eject/Fast Forward) button to stop playback and remove the
cassette at any time.
7. When you finished listening. press POWER button to turn the system off.
Cassette Tape
Open End
EN - 52