Rds (Radio Data System, Optional) - Hyundai CMRXD 7238 SU Instruction Manual

SELECTING A BAND
Press RADIO once or more to select
FM1–FM2–FM3–AM1–AM2.
Display shows wave band and frequency if
already stored.
SELECTING A STATION
Press the ► ► I or I ◄ ◄ tuning button to tune to
another station.
TUNING
- AUTO SEEK
Press and hold the ► ► I or I ◄ ◄ buttons to seek
the next/previous station automatically.
- MANUAL SEEK
Press the ► ► I or I ◄ ◄ buttons to enter manual
tuning mode. Press the buttons again to move
the radio frequency number up or down one step.
STORING STATIONS
- Auto storing
1) Select a band (if needed).
2) Hold RADIO more than 2 seconds,
the 6 strongest available stations will be
automatically saved.
RECALLING A STATION
1) Select a band (if needed).
2) Long press the knob on the front panel
until the circle flashed, then rotate the knob
to select the corresponding stored station,
and press the knob to confirm.
RDS (RADIO DATA SYSTEM,
OPTIONAL)
RDS service availability varies with areas.
Please understand if RDS service is not
available in your area, the following service is not
available.
RDS BASICS
AF (Alternative Frequency): When the radio
signal strength is poor, enabling the AF function
will allow the unit to automatically search another
station with the same PI (program identification)
as the current station but with stronger signal
strength.
PS (Program Service name): The name of
station will be displayed instead of frequency.
AF: ON/OFF
Long press the MUSIC button to set AF
(Alternative Frequency) on or off.
AF ON: AF function is activated.
AF OFF: AF function is disabled.
Remark: AF indicator on LCD will flash until RDS
information is received. If RDS service is not
available in your area, turn off the AF mode.
TA: ON/OFF
Long press the MOVIE button to set TA (Traffic
Announcements Identification) on or off.
When TA mode is turned on, the TA indicator
will blink.
When traffic announcement is received, the TA
indicator will display. The unit will temporarily
switch to the tuner mode (regardless of the current
mode) and begin broadcasting the announcement
at TA volume level. After the traffic announcement
is over, it will return to the previous mode and
volume level. When TA is turned on, SEEK,
SCAN, AMS function can only be received or
saved when traffic program identification (TP)
code is received.
TA VOLUME: 00 – 40
Rotate the knob to set TA–VOL level.
CT Service (Clock Time)
When receiving an RDS station, the CT (Clock
Time) service automatically adjusts the time.
TRAFFIC ANNOUNCEMENTS
Some RDS FM stations periodically provide
traffic information.
TP (Traffic Program Identification)
Broadcasting of traffic information
TA (Traffic Announcements Identification)
Radio announcements on traffic conditions
EON (ENHANCED OTHER NETWORKS)
When EON data is received, the EON indicator
lights and the TA and AF functions are enhanced.
TA: Traffic information can be received from
the current station or stations in other network.
AF: The frequency list of preset RDS stations
is updated by EON data. EON enables the radio
to make fuller use of RDS information. It constantly
updates the AF list of preset stations, including
the one that currently tuned into. If you preset
a station around the area at your home, you will
later be able to receive the same station at an
alternative frequency, or any other station
serving the same program, EON also keeps track
of locally available TP stations for quick reception.
EN - 66