Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents ...2 Important safeguards...3 Installation/Connections...4 Panel controls...7...
Important safeguards Using the device at temperature below -10º may cause the breakage of the device. BEFORE USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE! Read carefully through this manual to familiarize yourself with this high-quality sound system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
3. Insert trim plate. When you prepare to insert trim plate, please check it s direction. Once it was up side down, it cannot be fixed. IMPORTANT: Remove these two screws before installation. Otherwise, the DVD Player will not work...
Page 6
Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord as illustrated (modified wiring), or else the memory of the unit may be lost after you power off. Contact your authorized car dealer before installing this unit.
Panel controls Front panel 1. MUTE button Press it to cut down the volume output, press it again to resume volume. 2. PWR button Press PWR to turn the power on. Press again to turn the power off. 3. BAND button Press it repeatedly to select your desired radio band (FM1, FM2, FM3, FM (OIRT), AM1, AM2) during RADIO mode.
Page 8
5. AF button Press it to activate the AF function. Press it for 2 seconds to choose REG ON, press it again for 2 seconds to switch to REG OFF. 6. TA button Press it to activate the TA function. Press it for 2 seconds to choose ST, press it again for 2 seconds to switch to MONO.
Page 9
17. PLAY/ PAUSE button Use this button to play or pause playback. Under the pause status, press it to play. 18. PRESET STATION [1-6] buttons 19. VOL knob (rotate it to adjust the volume)/ MENU/SEL button (during VCD/ DVD playback, press more then 2 seconds to display the root menu of the disc.
Page 10
Back of the front panel Press the button to open the panel and press Disc eject Disc slot: insert a disc for playback here Reset hole Note: Pressing the RESET hole will erase the clock setting and stored stations. Panel status indicator lights up when you slide the panel down; flashes when you remove the panel. to eject the disc.
Remote control 1. ZOOM button 2. TITLE button 3. PWR button 4. Setup button 5. Directional buttons for menu selection 6. ENTER button 7. PROGRAM button 8. Digit area 9. SELECT button (to select basic sound setting options) 10. VOLUME button 11.
Page 12
Battery information of remote controller 1. Press the catch and at the same time pull out the battery tray. 2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control. Warning: Store the battery where children cannot reach.
Glossary PBC (PlayBack Control) PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image.
Features Fully compatible Fully compatible with the most popular discs formats such as DVD, CD, CD-R (containing MP3, JPEG), CD-RW represented in the market. Upgrade intelligently Support the function of upgrading the software for playing discs of new formats to keep up with the market competition.
Compatible discs DVD Video DVD disc include video and audio data. The data can contained by the 12 cm diameter of DVD disc is 7 times of one can contained by the common CD-R disc. Its maximum continuous playback time can be up to 2 hours (one of double-sided disc can be up to 4 hours).
Page 16
Photo-CD Compatible with Photo-CD disc. Do not need setting the additional soft ware. Photo-CD is a disc format that stores photo with electronic file format developed by Konica company. CD-R/CD-RW Compatible with CD-R/CD-RW disc with ISO9660 specification include the format of MP3, JPG, JPEG, Ac3, PCM, MPG, MPE, WMA, MP4.
General operation Power on/ off Press button on the front panel or RC to turn the unit on. Press again to switch the set to turn the unit off. When you switch off the system or car ignition, the settings, tuner presets and the volume level will be retained in the unit s memory.
Page 18
BALANCE control Display shows the BALANCE level. FADER control Display shows the FADER level. Push the knob for more then 2 seconds to enter the menu and select the mode: TA VOL mode: rotate the knob to adjust the TA volume. EQ mode: rotate the knob to select EQ sound effect: ROCK, POP, CLASSIC, FLAT, EQ OFF.
Turning the sound off Press the MUTE button to turn the sound off. Press it again or use the VOLUME buttons to turn the sound on. Adjusting clock Displaying time: Press DISP button to display the current time on the LCD, it returns to original in 5 seconds. Setting time: Press DISP again for more than2 seconds to select the hour setting.
Digital tuner Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press PWR to turn the power on, then press the SRC button once or more to select TUNER. Press BAND button once or more to select: FM1, FM2, FM3, FM (OIRT), AM1, AM2 (for 2 bands).
Page 21
AMS function (Auto Memory Store) Preset scan: press AMS button for less than 1 second to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds. To stop preset scan, press AMS button again. Auto memory store: press AMS button for more than 2 seconds to enter auto store mode.
Page 22
Press PTY the second time, then press the number buttons, you can select the language program style. To choose the desired program style use the following table: TA (Traffic Alarm) function Keep pressing TA button, LCD shows TA, traffic program will be automatically searched and saved, LCD shows TP, the program is received.
Disc operations Discs for playback This set can play all digital audio CD, Picture-CD, Photo-CD, CD-R/RW, MP3, WMA, VCD, SVCD, DVD, DVD±R, MP4. The following file types are supported: Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) Picture file: JPEG (*.jpg)
Page 24
Loading a disc 1. Press button on the panel to slide down the panel. Insert the disc with the printed side facing upward into the slot. 2. Press button to slide down the panel. Press Playing a disc 1. When disc inserted, display shows LOAD and then READ. For MP3 or disc with mixed files, reading time may exceed 1 minute.
Page 25
Stop playback For DVD/ VCD discs: 1. During playback press STOP button to pause the playing, the unit can memorize the play point. 2. Press PLAY/ PAUSE to continue playing from the pausing point. 3. Press STOP to stop the disc completely. For CD, MP3 discs: During playback press STOP button to stop the playing.
Page 26
Random track playback For CD/ MP3/ VCD only. You can play all the tracks in random order. 1. During playback, press RDM once or more. RDM icon will appear on the display. 2. Press again to select normal playback. Repeating of the playback 1.
Page 27
PBC (Playback Control) For VCD only. If you insert a VCD with PBC, playback starts from the beginning of the 1st track automatically. 1. Press PBC button to activate interactive menu on screen during playback. 2. If the menu consists a list of titles, you can select a desired one using the 3.
Page 28
3. If you want to delete the list, move the cursor to "CLEAR", press ENTER to delete all the list set before. 4. Press PROG again to exit program play. Selecting different audio modes For DVD disc: Press R/L button on the panel or AUDIO on the remote control repeatedly to select the audio language to listen (if the disc supports multi-language mode).
Page 29
Changing angle For DVD only. If DVD discs support multi-angle playback, press ANGLE button to playback images in different camera angles. If discs doesn't support multi-angle playback, this function will not work. If no operation within 1 second, angle description will disappear. Changing size Press ZOOM.
File Select to enter file list and use to select desired file, press ENTER to playback, press STOP button to return. For PICTURE, press PLAY/ PAUSE to slide show the pictures, press PROG to select picture showing style. For MUSIC, press STOP button to enter intro logo, then press PLAY/ PAUSE button to return. USB/ SD/ MMC MP3 operations SD/ MMC card Loading: Insert the SD/MMC card into the slot, with the front side at right.
Page 31
USB/ SD/ MMC notes 1. SD/ MMC card support 2. USB flash memory 2 in 1 (SD/ MMC) support 3. FAT 12/ FAT16/ FAT32 is possible FAT 12/ 16 (dir: 200 support, file: 500 support), FAT 32 (dir: 200 support, file: 500 support) 4.
DVD system setup Press the SETUP button when the main unit is in play mode. The setup menu will be displayed on LCD. Use the buttons on the RC to select the desired page: SYSTEM, LANGUAGE, AUDIO, VIDEO, DIGITAL. Use the buttons to select the desired option.
Page 33
TV type Password Setting rating Load default Select TV type to watch wide screen movies. 4:3 PAN SCAN: For 4:3 TV, left and right edges will be cut. 4:3 LETTER BOX: For 4:3 TV, black bars will appear on top and bottom. 16:9: For 16:9 wide screen TV.
Page 34
Language setup On-screen display language Audio language Subtitle language Menu language Select the language to be used for the on-screen display. Select the language to be used for the audio. You can select a preferred audio from those included on the DVD video disk. (The screen on your player may have difference with the screen shown here) Select the language to be used for the Subtitles.
Page 35
Audio setup Audio output Video setup Brightness Contrast Select digital output format. APDIF/OFF: There is no signal output from coaxial or optical output. SPDIF/RAW: When the unit is connected with the amplifier by coaxial or optical connecter, please select this mode. SPDIF/PCM: When the unit is connected with the two-channel digital stereo amplifier, please select this mode.
Page 36
Saturation Sharpness Set the hue of the video output with Set the saturation of the video output with Set the sharpness of the video output with...
Digital setup Output mode Dynamic range Dual mono Select the output mode: LINE OUT: Compress the input signal. The volume is small. RF REMOD: The volume is large. When you select the compressed mode as line out , select it to adjust the compression proportion and get the different compressed effect.
Anti-theft system Removing the panel 1. Press PWR button to switch off the power of the unit. 2. Press button to flip down the panel. 3. Hold the middle of the panel. Take off one end, and then take off the other end. 4.
Handling discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust.
Troubleshooting guide Cause Symptom The car ignition is not on. General No power The fuse is blown. Presence of disc inside the player. Disc Disc cannot be loaded. Disc cannot be read. Inserting the disc in upside down. Compact disc is extremely dirty or defective.
Specification General. Power supply: Current consumption: Maximum power output: Dimensions (W x H x D) Working temperature range: FM Stereo Radio. Frequency range: Usable sensitivity: MW Section. Frequency range: DVD Deck Specification Format Video System/ Audio System Loading System Mounting Angle Video Specification Video System Video Output level...
Page 51
ZOOM TITLE DVD SETUP JOG UP/DOWN, JOG RIGHT/LEFT (ENTER) PROGRAM SELECT ( VOLUME ( MUTE RADIO TUNE/SEARCH ( REPEAT STOP PLAY/PAUSE GOTO MENU PBC AUDIO DISPLAY...
Page 57
PWR, PWR, USB, Card. : USB Card SD/MMC Radio, FM (OIRT), RESET ( RESET, VOL, VOLUME BAND VOL/BAS/TRE/BAL/FAD, : DISC, Tuner (Radio), FM1, FM2, FM3,...
Page 58
BASS ( TREBLE ( BALANCE FADER TA VOL: ROCK, POP, CLASSIC, FLAT, EQ OFF ( LOUD: BEEP: 12/24 hours: TA seek: Program ALARM: TA SEEK: PI ( TP (Traffic...
Page 59
RETUNE: Retune-S Retune-L Retune L: Retune S: Retune VOL LAST/ ADJUST: COLOUR 1/2: MUTE, VOLUME, (RDS), TA SEEK 180 TA SEEK 45 VOL ADJ, DISP, DISP, VOLUME DISP, TA SEEK. VOL LAST, VOLUME TA Seek. RDS.
Page 60
RDS ( PWR, SR , Radio. BAND, : FM 1, FM 2, FM 3, FM (OIRT), AM1, AM2 ( 1~6,...
Page 61
AMS ( AF ( RDS. AMS, 1~6. AMS. 1~6. AMS. AF OFF...
Page 62
OFF. REG ON ( REG OFF ( PTY ( REGION ON REGION NO PTY.
Page 63
TA ( TA SEEK, TA ALARM, EON ( « ». EON, « ». TA AF...
Need help?
Do you have a question about the H- CMD7078 and is the answer not in the manual?
Questions and answers