Adding A New User Pin; Deleting The User Pins; Changing The User Pin - iStorage diskg User Manual

12. Adding a new User PIN

You can add a new User PIN by doing the following:

13. Deleting the User PINs

You can delete all User PINs by doing the following:

14. Changing the User PIN

You can change the User PIN by doing the following:
1. Enter the Admin Mode (refer to page 9 for details).
2. Press and hold + 1 until the LED indicator light flashes
3. Enter a User PIN and press
of 16 digits). The LED indicator light will flash
4. Re-enter the new User PIN and press
solid GREEN for two seconds and then solid BLUE, the User PIN was
added successfully.
1. Enter the Admin Mode (refer to page 9 for details).
2. Press and hold 7 + 8 +
BLUE
flashes intermittently. After the LED indicator light will flash
BLUE
three times and then
3. Press and hold 7 + 8 +
light goes on solid GREEN
indicates that the User PINs were deleted successfully.
1. Enter User Mode (refer to page 8 for details).
2. Press and hold + 1 until the LED indicator light flashes RED.
3. Enter your old PIN and press
GREEN, then change to flashing BLUE.
4. Enter the new PIN and press
of 6 digits and a maximum of 16 digits). The LED indicator light will flash
GREEN three times.
5. Immediately re-enter the new User PIN and press
will stay solid GREEN indicating that the User PIN has been changed successfully.
(a minimum of 6 digits and a maximum
GREEN
. If the LED indicator light stays
for five seconds until the LED indicator light
intermittently.
a second time for five seconds until the LED indicator
for two seconds and then back to solid BLUE, this
. The LED indicator light will turn
(The PIN must be a minimum
www.istorage-uk.com
BLUE intermittently.
three times.
GREEN
. The LED indicator light
#11