Connecting The Diskg - iStorage diskg User Manual

Be sure to review the following information before you begin to use the diskG.
Caution: Use only the included cables with your diskG. You might damage the drive if you
use a cable not included with the diskG.

2. Connecting the diskG

1. Attach the integrated USB cable of the diskG drive to an available USB port
on your computer, as shown below.
2. The diskG LED indicator light should glow RED.
Note: If the LED indicator light does not power, use the included USB Y-cable.
Refer to directions on the following page.
#6
www.istorage-uk.com