Optical Drive - HP Pavilion 14 Series Maintenance And Service Manual

Reverse this procedure to install the memory module.

Optical drive

NOTE: The optical drive spare part kit includes a bezel and bracket.
Description
SuperMulti DVD±R/RW Double-Layer Drive
Aqua blue finish
Natural silver finish
Snow white finish
Tropical blue finish
Vibrant red finish
Before removing the optical drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Remove the optical drive:
1. Using a small Phillips screwdriver, remove the Phillips M2.5×6.5 screw that secures the optical drive to
the computer (1).
2. Pull the tray (2) out from the front until the optical drive is completely removed from the computer.
If it is necessary to replace the optical drive bracket and bezel, position the optical drive with the rear panel
toward you.
40 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 37).
Spare part number
767251-001
767252-001
767250-001
790005-001
767253-001