Heat Sink Assembly - HP Pavilion 14 Series Maintenance And Service Manual

4. Remove the fan (3) from the system board.
Reverse this procedure to install the fan.

Heat sink assembly

Description
Heat sink for use only on computer models equipped with Intel processors and UMA graphics 8.5 W
Heat sink for use only on computer models equipped with Intel processors and UMA graphics 19 W
Heat sink for use only on computer models equipped with Intel processors and switchable
discrete graphics 19 W
Before removing the heat sink assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 37), and then remove the following components:
Spare part number
767341-001
767339-001
767340-001