Rtc Battery - HP Pavilion 14 Series Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service door (see
b. Optical drive (see
c. Top cover (see
d. System board (see
Remove the RTC battery:
1. Turn the system board upside down, with the front toward you.
2. Use a flat-bladed, non-metallic tool (1) to release the RTC battery from the socket on the system board.
The battery is spring loaded and will pop up.
3. Remove the RTC battery (2).
Reverse this procedure to install the RTC battery. When installing the RTC battery, make sure the "+" sign
faces up.
62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 37), and then remove the following components:
Service door on page 38)
Optical drive on page 40)
Top cover on page 47)
System board on page 57)
Spare part number
697917-001