Understanding the printer menus
Print Settings
Copies
1–999
Paper Source
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Sides (Duplex)
1 sided
2 sided
Staple
Off
On
Duplex Binding
Long Edge
Short Edge
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
Specify whether prints are on one side or on both sides of the page.
Note: "1 sided" is the factory default setting.
Specify whether prints are stapled.
Notes:
•
Off is the factory default setting.
•
This menu appears only when a staple finisher is installed.
Define binding for duplexed pages in relation to page orientation.
Notes:
•
Long Edge assumes binding along the long edge of the page (left edge for portrait and top
edge for landscape).
•
Short Edge assumes binding along the short edge of the page (top edge for portrait and
left edge for landscape).
Specify that multiple‑page images be printed on one side of a paper.
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Specify the positioning of multiple‑page images.
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they are in portrait or
landscape orientation.
186