Setting Scent Intensity; Scent Control; The Last Step - Prolitec Air/Q 310 User Manual

Starting Up
2. Consult the Room-Size Table on page 7 to give you a level (1 to 50).
THIS IS ONLY A STARTING POINT.
3. Press the power button on. Turn the dial to Program and set the intensity level
with the + /– keys. You will see the level numbers (1 to 50) on the right side of
the screen.
Hint: There are many variables involved in finding the scent level that
works. These include size, airflow, number of fresh air changes per hour
and, most of all, user preferences. Experiment with different levels until you
are completely satisfied.

Scent Control

If you followed the Room-Size Chart, you have set Air/Q
range for your room size. If after 30 minutes you feel the scent is not detectable,
increase the setting by about 10%. For example, if your start setting was 20,
increase it by 10%, or to setting 22. Keep increasing until you and others in the
space can detect a slight scent throughout the space.

The Last Step

1. Set the dial to either 24/7 or Program if you have programmed a start/stop time.
2. Make sure the power is on. The blue light will show through the button.
3. Close and lock the door, storing the key in a known place.
310 to the low end of the
™
19