Prolitec Air/Q 310 User Manual page 15

Installation
NOTE: Remember that the standard installation is to position the appliance right
over the power source, storing the power-supply block and the power cord in the
recess in the back of the appliance (US version only). To make this easy, do not
untie the power cord and take just enough wire to make the connection.
Plug
Location
Cord Channel
Outlet
Step 9 – Fitting the Appliance in Place
Place the appliance so that the big holes in the top of the back cover fit over the
rounded locking posts. In doing this, make sure the appliance is flush with the wall
and the posts are in the holes of the appliance. Slide the appliance downward to
lock on the posts. Sometimes this slide requires a slight tap on the top of the
appliance with your hand.
13