Programming The Appliance - Prolitec Air/Q 310 User Manual

Starting Up
5. If the appliance has been previously programmed (see Programming the
Appliance below), simply press the power button, close and lock the door.

Programming the Appliance

1. Unlock and open the door.
2. Turn on the power by pressing the ON/OFF button in the upper left corner of the
control panel.
3. Set the Clock.
• T urn the dial to Set Clock. The time will blink.
• A djust the time forward or backward using the + /– buttons on the right side
of the control panel. AM or PM is indicated on the lower right side of the
time digits.
4. 24/7 Mode.
• I f you want Air/Q
a day — turn the dial to 24/7. If not, skip to Step 5.
5. Set specific Start/Stop Times.
• T urn the dial to Start.
• A djust the clock to the time you want the appliance to start each day using
the + /– keys.
• T urn the dial to Stop.
• A djust the clock to the time you want the appliance to stop each day using
the + /– keys.
• T urn the dial to Program.
Setting Scent Intensity
1. Determine the approximate size of the room in cubic feet or cubic meters by
multiplying length x width x ceiling height.
18
310 to run continuously — 7 days a week, 24 hours
™