Prolitec Air/Q 310 User Manual page 13

Installation
Step 4 – Installing the Top Anchors
Set the mounting bracket aside. Use an electric drill to make a / " hole at the exact
1
8
location you marked. This will serve as a guide for the anchors. Use a hammer
to tap the anchors in far enough so they stay well in position. Then screw them
straight into the drywall. Avoid screwing them in at an angle.
Hint: If you use an electric drill with a Phillips driver head, make sure that the head
fits the anchor perfectly, as the anchor strips easily. Set the drill to a slow rotation.
Step 5 – Marking the Bottom Anchor Holes
Now you can mark the holes for the bottom anchors using the mounting bracket
as a template. Hold the mounting bracket in place and screw the flat-head screws
half way into the top anchors. This will prevent the bracket from moving. Now use
the pointy tool to mark the location for the two bottom anchors. Unscrew the top
screws and set the bracket aside.
11