Start; Stop; Switching Off - Husqvarna 420 Operator's Manual

4.3 Start

1. Open the control panel cover by pressing the
STOP button.
2. Set the main switch in position 1.
3. Enter the PIN code.
4. Push the Start button.
5. Select the desired operating mode, see 5.1
Operating Mode Start on page 38.
6. Shut the hatch within 10 seconds.
If the robotic lawnmower is parked in the charging station,
it will only leave the charging station when the battery is
fully charged and if the timer is set to allow the mower to
operate.
Before the blade disc starts a warning beep can be heard
consisting of 5 short beeps for 2 seconds.

4.4 Stop

1. Press the STOP button.
The robotic lawnmower stops, the blade motor stops and
the control panel hatch opens.

4.5 Switching Off

1. Press the STOP button.
2. Set the main switch in 0 position.
Always switch the robotic lawnmower off using the
main switch if it requires maintenance or if the robotic
lawnmower must be moved outside the working area.
1157866-26,420,430X,450X,EN_160314.indd 35
USAGE
3012-1204
3012-1044
3012-1060
English - 35
2016-03-14 16:58:53