Control Panel Automower ® 320/330X; Operation Selection Start; Operation Selection Parking - Husqvarna 305 Operator's Manual

• MAN. When mowing secondary areas the MAN setting must be
used. If MAN is selected and the robotic lawnmower starts when it
is out on the lawn, it will mow until the battery runs out. It will then
stop and the 'Needs manual charging' message will appear. The
robotic lawnmower must then be moved manually to the charging
station and then started manually after charging. If the robotic
lawnmower charges in the MAN mode, it will fully charge, move
about 20 cm out of the charging station and then stop. This indica-
tes that it is charged and ready to start mowing.
3.2 Control panel Automower
When the stop button has been pressed and the hatch is opened, the
start page is displayed showing the following information:
• Operating information, e.g. MOWING, PARKED or TIMER. If the
STOP button is pressed when the robotic lawnmower is running,
what it did just before it was stopped e.g. MOWING or SEAR-
CHING is displayed. The text READY is displayed if the robotic
lawnmower is not in any specific operating mode, e.g. if the main
switch has just been turned on.
• Date and clock show the current time.
• For Automower 330X: The satellite symbol is shown when the
®
GPS-supported navigation is activated. Symbol (A) is shown when
the robotic lawnmower has made contact with a sufficient number
of GPS satellites. Symbol (B) shows when the robotic lawnmower
has not made contact with a sufficient number of GPS satellites.
Symbol (A) blinks during the first days the robotic lawnmower is
working, as it is collecting GPS information about the installation.
• ECO is displayed if the robotic lawnmower is set in ECO mode.
• The clock symbol indicates when the timer settings are set. The clock
icon is white (A) when the robotic lawnmower is allowed to mow due
to a timer setting and it is black (B) when the mower is not allowed to
mow. If the mower is not allowed to mow due to Weather timer, sym-
bol (C) is shown. If the operation mode Override timer is chosen, sym-
bol (D) is shown.
• The battery status shows the remaining battery charge. If the robo-
tic lawnmower is loading, a flash is also shown over the battery
sumbol (A). If the robotic lawnmower is placed in the charging sta-
tion without charging, (B) is shown.
• The height adjustment setting is displayed as a scale/numerical
value.
• The number of operating hours indicates the number of hours
since the day of manufacture that the robotic lawnmower has spent
mowing or searching for the charging station.
ENGLISH
The keypad consists of six groups of buttons:
•
320/330X
®
•
•
•
•
•

Operation selection Start

When the START button has been pressed the following operation
selections can be selected:
•
•
•
•

Operation selection Parking

When the PARK button is pressed the following operation selections can
be chosen.
The START button is used to activate the robotic lawnmower. This
is normally the last button to be pressed before closing the display
hatch.
The BACK and OK buttons are used to navigate in the menu. The
OK button is also used to confirm settings in the menu.
The arrow keys are used to navigate in the menu but also to make
selections in certain setting options.
The MENU button is used to go to the main menu.
The PARK button is used to send the robotic lawnmower to the
charging station.
Numbers are used to enter settings, for example, PIN code, time
or exit direction. They can also be used to enter a number series
for shortcuts to the various menus see Main menu.
MAIN AREA. The standard, automatic operating mode where the
robotic lawnmower mows and charges continually.
SECONDARY AREA. is used when mowing secondary areas
where the robotic lawnmower cannot travel to the charging station
automatically.
If the robotic lawnmower charges in the Secondary area mode, it
will fully charge, drive out about 50 cm and then stop. This indica-
tes that it is charged and ready to start mowing.
If the main working area has to be cut after charging, it is appro-
priate to switch the operation selection to Main area before placing
the robotic lawnmower in the charging station.
OVERRIDE TIMER. Any timer settings made can be temporarily
overridden by selecting Override timer. It is possible to override the
timer for 1, 3 or 5 days.
SPOT CUTTING means the robotic lawnmower will work in a spiral
pattern in order to cut the grass in the area where the grass has
been mown less than in other parts of the garden.
The Spot Cutting function is activated with the START button. You
can select how the robotic lawnmower should continue to work
once mowing is finished by pressing Right Arrow and then specify-
ing On Main Area or On Secondary Area.
English - 47