Messages - Husqvarna 420 Operator's Manual

MENU FUNCTIONS
Duration of time lock
When Time lock is activated, there is also the possibility
to select how many days the robotic lawnmower is to
request a PIN code. A figure between 1 and 90 can be
selected.
The factory setting is 30 days.
Duration of alarm
When Alarm is activated there is also the possibility to
select how long the alarm signal should sound. A figure
between 1 and 20 minutes can be selected.

6.6 Messages

Historical and information messages can be read using
this function. Regards some of the most common fault
messages, there are tips and advice to help you rectify
the fault, see 9.1 Fault Messages on page 80.
Messages
Fault messages
If the robotic lawnmower is disrupted in any way e.g. gets
stuck under a fallen branch a message is shown in the
Fault messages
Info messages
lawnmower's display relating to the disruption and the
time it happened.
If the same fault message is repeated several times,
this may indicate that an adjustment to the installation or
the robotic lawnmower is required. For more information
concerning the possible caused of each message, see 9.1
Fault Messages on page 80.
This list contains the latest 50 fault messages sorted by
date with the last incident to occur first on the list.
The date and time when the fault messages are displayed
can be shown by selecting a fault message and pressing
the OK button.
Tips and advice on what to do to rectify the fault will also
be displayed.
Info messages
Messages shown in the display not caused by an actual
fault are instead saved under the Info messages heading.
Examples for such messages are Weak GPS signal
and Slope too steep. For more information concerning
the possible caused of each message, see 9.1 Fault
Messages on page 80.
This list contains the latest 50 fault messages sorted by
date with the last incident to occur first on the list.
English - 49
1157866-26,420,430X,450X,EN_160314.indd 49 2016-03-14 16:59:12