Menu Structure - Husqvarna 420 Operator's Manual

6.2 Menu Structure

The following table summarizes the menu selections found in the main menu. The following chapter provides more
detailed information about how each function is used and which setting options are available.
Use the arrow keys to browse the menu. Confirm selections with OK.
English - 42
1157866-26,420,430X,450X,EN_160314.indd 42
MENU FUNCTIONS
Timer
The lawn should not be cut too often to obtain the best mowing result. Consequently,
it is important to limit the operating time using the timer function if the working area
is less than the robotic lawnmower's working capacity. The timer function is also an
ideal means to control which work hours the robotic lawnmower should not mow, for
example, when the children are playing in the yard.
Cutting height
The cutting height can be varied from MIN (2 cm) to MAX (6 cm).
During the first week after a new installation, the cutting height must be set to MAX to
avoid damaging the loop wire. After this, the cutting height can be lowered one step
every week until the desired cutting height has been reached.
Security
In this menu, settings relating to security and the connection between the robotic
lawnmower and the charging station can be made.
There are three security levels to choose from but it is also possible to define your own
combination of security functions.
Messages
Historical faults and information messages can be read in this menu. Regards some
of the most common fault messages, there are tips and advice to help you rectify the
fault, see 9.1 Fault Messages on page 80.
Weather timer
This function allows the robotic lawnmower to automatically adjust its mowing times
based on how quick the lawn grows. When the weather is good for grass growth, the
robotic lawnmower mows more often and when grass growth is slower, the robotic
lawnmower will automatically spend less time on the lawn.
Installation
This menu is used to steer the robotic lawnmower to remote parts of the working
area and to control how the robotic lawnmower searches for the charging station. The
factory settings can be kept for many working areas, i.e. allow the robotic lawnmower
itself to combine the various search methods and the underlying settings.
Settings
This selection allows you to make changes to the general robotic lawnmower settings
such as date and time.
Accessories
Settings for accessories mounted on the mower can be made in this menu. Get in
touch with your local dealer for more information concerning the accessories that are
available for your robotic lawnmower.
2016-03-14 16:59:05