Removing The Power-Adapter Port; Prerequisites; Procedure - Dell Alienware 17 Service Manual

Removing the power-adapter
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1 Remove the base
2 Remove the wireless
3 Follow the procedure from step 1 to step 9 in "Removing the
4 Remove the display
5 Follow the procedure from step 1 to step 7 in "Removing the
Procedure
1 Remove the screws that secure the power-adapter port bracket to the power-
adapter port.
2 Lift the power-adapter port bracket off the power-adapter port.
3 Note the power-adapter port cable routing and remove the cable from the
routing guides on the computer base.
4 Lift the power-adapter port along with its cable off the computer base.
computer. After working inside your computer,
After working inside your
panel.
card.
assembly.
computer. For more

Removing the power-adapter port

43
port
palm rest".
system board".
99