Replacing The Display Back-Cover; Procedure; Post-Requisites - Dell Alienware 17 Service Manual

Replacing the display back-cover

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with non-
touchscreen display.
1 Replace the AlienFX AlienHead board.
2 Replace the AlienFX Display light.
3 Adhere the display-board and camera cable to the display back-cover.
4 Route the display-board cable through the routing guides on the display back-
cover.
5 Connect the camera cable to the camera module.
Post-requisites
1 Replace the Alienware AlienHead LED
2 Replace the display-panel AlienFX
3 Replace the camera.
4 Replace the display
5 Replace the display
6 Replace the display
computer. After working inside your computer,
After working inside your
board.
LEDs.
panel.
bezel.
assembly.
computer. For more
Replacing the display back-cover
64
140