WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Adhere the logo board on the display bezel.
2
Connect the logo-board cable to the logo board and adhere the adhesive tape.
3
Slide the display-board cables to their respective connectors on the logo board
and press down the latches to secure the cables.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Follow the procedure from step 5 to step 11 in "Replacing the
4
Replace the
wireless
5
Replace the
base
Replacing the logo board
computer. After working inside your computer,
After working inside your
bezel.
assembly.
card.
panel.
computer. For more
palm
Replacing the logo board
56
rest".
125