WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
Procedure
1
Connect the battery cable to the system board.
2
Slide the tabs on the base panel into the slots on the computer base and snap
the base panel into place.
3
Tighten the captive screws that secure the base panel to the computer base.
Replacing the base panel
computer. After working inside your computer,
After working inside your
computer. For more
Replacing the base panel
4
18