Removing The Status-Light Board; Prerequisites; Procedure - Dell Alienware 17 Service Manual

Removing the status-light board

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1 Remove the base
2 Follow the procedure from step 1 to step 9 in "Removing the
Procedure
1 Lift the latch and disconnect the status-light board cable from the status-light
board.
2 Remove the screws that secure the status-light board to the palm-rest
assembly.
3 Lift the status-light board off the palm-rest assembly.
computer. After working inside your computer,
After working inside your
panel.
computer. For more
Removing the status-light board
15
palm rest".
42