Replacing The Display Bezel; Procedure; Post-Requisites - Dell Alienware 17 Service Manual

Replacing the display bezel

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with non-
touchscreen display.
1 Adhere the logo board on the display bezel.
2 Connect the logo-board cable to the logo board and adhere the adhesive tape.
3 Slide the display-board cables to their respective connectors on the logo board
and press down the latches to secure the cables.
4 Turn the display bezel over.
5 Align the display bezel with the display back-cover and gently snap the display
bezel into place.
Post-requisites
1 Replace the display
2 Follow the procedure from step 5 to step 11 in "Replacing the
3 Replace the wireless
4 Replace the base
computer. After working inside your computer,
After working inside your
assembly.
card.
panel.
computer. For more
palm
Replacing the display bezel
48
rest".
110