WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
NOTE:
This chapter is applicable only if you have purchased a laptop with non-
touchscreen display.
1
Using the alignment posts, adhere the camera module to the display back-
cover and snap it into place.
2
Connect the camera cable to the camera module.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Follow the procedure from step 5 to step 11 in "Replacing the
4
Replace the
wireless
5
Replace the
base
Replacing the camera
computer. After working inside your computer,
After working inside your
bezel.
assembly.
card.
panel.
computer. For more
palm
rest".
Replacing the camera
58
128