Removing The Display Assembly; Prerequisites; Procedure - Dell Alienware 17 Service Manual

Removing the display assembly

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1 Remove the base
2 Follow the procedure from step 1 to step 9 in "Removing the
Procedure
1 Close the display and turn the computer over.
2 Remove the screws that secure the display assembly to the computer base.
3 Remove the screw that secures the wireless-card bracket and the wireless card
to the system board.
4 Lift the wireless-card bracket off the wireless card.
5 Disconnect the antenna cables from the wireless card.
computer. After working inside your computer,
After working inside your
panel.
computer. For more
Removing the display assembly
21
palm rest".
55